K98 Springer Projects

A place to discuss WW2 airsoft guns.
User avatar
Sgt.Heide
Fought at the Battle of Hastings
Fought at the Battle of Hastings
Posts: 5875
Joined: Mon Mar 05, 2007 6:52 pm
Location: Midlands.

K98 Springer Projects

Postby Sgt.Heide » Sat Aug 04, 2007 8:56 am

Well, I'm so bored wating for the postie to deliver my front sight assembly, I thought I'd post up a "so far" picture of my MP001 conversion.

I got lucky with my choice of outer barrel tube, my bayonet fits perfectly. To finish it, I need to fit the front sight and try to modify the bolt handle to make it rounder but then I'll be ready for Enemy at the Gates!
Image

This is my first attempt at a custom made gun, so don't be too cruel in your comments!
User avatar
Sgt.Heide
Fought at the Battle of Hastings
Fought at the Battle of Hastings
Posts: 5875
Joined: Mon Mar 05, 2007 6:52 pm
Location: Midlands.

Postby Sgt.Heide » Sat Aug 04, 2007 9:26 am

Luckily, they're the mounts that were with the sight. All I did to them was to dry brush the hell out of them with some gun metal paint. I also cut the RIS sight rail in two, so the sight fits it exactly and then ground off the "excess" slots. Not having a rail over the bolt looks more "right" in my opinion. Thanks for the comment about the wood, I realised the look of the stock was paramount, so I sanded it before staining it a darker shade and then applied wood wax to bring out the grain.
stubblehopper

Postby stubblehopper » Sat Aug 04, 2007 9:29 am

Heide that looks very nice, what FPS have you got on that lovely little thing?
User avatar
Sgt.Heide
Fought at the Battle of Hastings
Fought at the Battle of Hastings
Posts: 5875
Joined: Mon Mar 05, 2007 6:52 pm
Location: Midlands.

Postby Sgt.Heide » Sat Aug 04, 2007 9:33 am

Not sure mate, don't have a chrono anymore. It will go through the bottom of a Stella can and leave a big dent in the top though, so it's pretty good. Once I've gotten the conversion completed, I'll be working on the accuracy and possibly adding some internal upgrades. It's already pretty accurate with .25g bb's up to about 50M but I'll be looking for better than that!
stubblehopper

Postby stubblehopper » Sat Aug 04, 2007 9:36 am

Try some 4.3's my Tanaka turned into a beast when I used them with green gas, and the bb's give out a loud thwack when you hit someone! BTW where did you get the sccope?
User avatar
Sgt.Heide
Fought at the Battle of Hastings
Fought at the Battle of Hastings
Posts: 5875
Joined: Mon Mar 05, 2007 6:52 pm
Location: Midlands.

Postby Sgt.Heide » Sat Aug 04, 2007 9:38 am

I have some .43's laying about I think. I'll be trying them out once I get the power upgraded. I always got very good results with previous sniper rifles using the Maruzen grand master bb's at .3g.

The scope came with the rifle, which I bought from Fandanglos at CR. It's surprisingly good as well!
stubblehopper

Postby stubblehopper » Sat Aug 04, 2007 9:43 am

Think I've got a spare M120 spring lying around, if thats any good to you you can have it, I'll bring it to the TD
User avatar
Sgt.Heide
Fought at the Battle of Hastings
Fought at the Battle of Hastings
Posts: 5875
Joined: Mon Mar 05, 2007 6:52 pm
Location: Midlands.

Postby Sgt.Heide » Sat Aug 04, 2007 9:49 am

Thanks Chris, that would be great. Hopefully, I'll have it finished and zeroed by then.
User avatar
JD7
Fought at the Battle of Hastings
Fought at the Battle of Hastings
Posts: 6303
Joined: Tue Feb 27, 2007 4:05 pm
Location: West Coast Scotland

Postby JD7 » Sat Aug 04, 2007 10:14 am

WOW that custom k98 looks amazing.

I wouldn't mind one of those to complement my Tanaka

Great work :D
User avatar
Steiner
10,000 posts
10,000 posts
Posts: 10368
Joined: Thu Dec 21, 2006 6:07 pm
Location: Demarcation!! (In Dorset)

Postby Steiner » Sat Aug 04, 2007 5:09 pm

Looks brilliant, Heide. Any thoughts of mass production? :wink:
Image

ImageImageImageImageImageImageImageImageImageImage
ImageImageImageImageImage

You've got nothing to ein, zwei, drei, vier
User avatar
Sgt.Heide
Fought at the Battle of Hastings
Fought at the Battle of Hastings
Posts: 5875
Joined: Mon Mar 05, 2007 6:52 pm
Location: Midlands.

Postby Sgt.Heide » Sat Aug 04, 2007 5:44 pm

To be honest Steiner, I think the cost would be prohibitive! A rough break down of what it's cost me in parts.

£70 for the stock (inc bands and upper handguard)
£75 for the donor gun & scope.
£45 (ish) for the other metal bits (cleaning rod, sights, trigger guard, etc).

On top of that, there's the sundries like the tube for the barrel, milliput, dremel cutting and sanding discs, paint, etc. If you shop around, the parts can be got for cheaper but I reckon it owes me about £220 or thereabouts, cheapest it could be done? I estimate £200. Factor in labour, and you're almosttalking the price of a used Tanaka one, at least £250.

I made this because I wanted a K98 I could use all year round and as a backup gun should my MP40 break. I might do another one for my Brother but I can't see any good in mass producing them, because of the cost and peoples' expectations when paying for something!
User avatar
JD7
Fought at the Battle of Hastings
Fought at the Battle of Hastings
Posts: 6303
Joined: Tue Feb 27, 2007 4:05 pm
Location: West Coast Scotland

Postby JD7 » Sat Aug 04, 2007 8:33 pm

Well if possible I would like to fire a mag through it once your happy with it? compare it to my own k98. I've never fired a springer airsoft rifle, especially one that looks as good as your custom one.
User avatar
Helga Geerhart
Fought at the Battle of Agincourt
Fought at the Battle of Agincourt
Posts: 4580
Joined: Sat Apr 21, 2007 11:08 pm
Location: Rogue Raspberry Moderator
Contact:

Postby Helga Geerhart » Sun Aug 05, 2007 9:35 am

Impressive considering what it started as, hat of to you heide :D wouldn't mind a quick blast myself with it to compare to the tanaka ;)
Image
ImageImageImageImageImage Image Image
User avatar
che
Fought at Waterloo
Fought at Waterloo
Posts: 2128
Joined: Fri Mar 02, 2007 12:09 am
Location: gods own county

Postby che » Sun Aug 05, 2007 9:59 pm

nice work wel done fella
theres nowt so Permanent as temporary

Image
Image
Image




ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage
ImageImage
User avatar
dieselmonkey
Fought at Waterloo
Fought at Waterloo
Posts: 2277
Joined: Wed Apr 11, 2007 3:39 pm
Location: Nottingham UK
Contact:

Postby dieselmonkey » Mon Aug 06, 2007 1:31 pm

looking really good there!

How easily did it fit into the stock? i'm having a right 'mare with the Mosin!

Return to “WW2 Airsoft Weapons”

Who is online

Users browsing this forum: Bing and 3 guests