aeg wood stock fit WE m14

A place to discuss WW2 airsoft guns.
b54gun
Just Out of Training
Just Out of Training
Posts: 23
Joined: Sat Nov 07, 2015 4:22 pm

aeg wood stock fit WE m14

Postby b54gun » Sat Aug 13, 2016 9:27 am

Hi guys does anyone know if a WE gbb m14 will fit a aeg m14 wooden stock
Thanks in advance
User avatar
Dom_e
Veteran
Veteran
Posts: 193
Joined: Wed Apr 02, 2014 5:49 am
Location: Barry, Glamorgan, UK
Contact:

Re: aeg wood stock fit WE m14

Postby Dom_e » Mon Aug 15, 2016 12:40 am

I expect it would physically fit inside, but you would need to do a lot of modification to make it work. AEG M14 stocks are very skimpy on material, especially in the wrist.

You would be better off making a stock from scratch or buying a RS M14 stock. I'm going to be making a walnut stock for a friend who has bought a WE M14 when I have time, but that's for next month or so.
Custom airsoft guns and ready-made kits: http://vintageairsoft.wordpress.com

Buy kits here: http://etsy.com/uk/shop/VintageAirsoft? ... _shop_menu

You can also LIKE our page on Facebook: https://www.facebook.com/thevintageairsofters
b54gun
Just Out of Training
Just Out of Training
Posts: 23
Joined: Sat Nov 07, 2015 4:22 pm

Re: aeg wood stock fit WE m14

Postby b54gun » Sat Aug 20, 2016 7:38 am

Cheers dom_e
User avatar
dadio
Fought at the Battle of Agincourt
Fought at the Battle of Agincourt
Posts: 3485
Joined: Sun Aug 02, 2009 8:13 pm
Location: guildford surrey

Re: aeg wood stock fit WE m14

Postby dadio » Sat Aug 20, 2016 10:39 am

I'd agree with Dom ,the wood on the AEG versions is very thin in the section behind the breech as the motor has to fit in ,a genuine stock and a dremmel is the way to go for a gbb ,in many cases the action is so similar in function that only a very little work is needed to get a good fit and price wise a genuine used stock probably be much different .
The only problem you might come accros is importing it from the US as they can be very conservative about experting even wooden gun parts and the best sorce of M14 parts will be the US .
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well

ImageImageImageImageImageImageImageImage
ImageImageImageImageImageImageImageImage
ImageImageImageImageImageImageImageImage
ImageImageImage
ImageImageImageImageImageImage
b54gun
Just Out of Training
Just Out of Training
Posts: 23
Joined: Sat Nov 07, 2015 4:22 pm

Re: aeg wood stock fit WE m14

Postby b54gun » Sun Aug 21, 2016 1:41 pm

Problem is cant find a wooden stock anywere but can get this aeg one , could the space were the motor would sit on the aeg stock be fiberglassed to strengthen it ?
User avatar
dadio
Fought at the Battle of Agincourt
Fought at the Battle of Agincourt
Posts: 3485
Joined: Sun Aug 02, 2009 8:13 pm
Location: guildford surrey

Re: aeg wood stock fit WE m14

Postby dadio » Sun Aug 21, 2016 4:04 pm

Yes that's a way around the problem but I spent 5 minutes yesterday looking and found rear steel wood ones for thirty five dollars a piece ,I didn't save the shop though I was just checking our advice was sound .
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well

ImageImageImageImageImageImageImageImage
ImageImageImageImageImageImageImageImage
ImageImageImageImageImageImageImageImage
ImageImageImage
ImageImageImageImageImageImage
b54gun
Just Out of Training
Just Out of Training
Posts: 23
Joined: Sat Nov 07, 2015 4:22 pm

Re: aeg wood stock fit WE m14

Postby b54gun » Sun Aug 21, 2016 4:13 pm

Ok cheers , when i was first looking i messaged a few places in the us but they wouldnt ship to uk so just started looking in the uk
User avatar
Dom_e
Veteran
Veteran
Posts: 193
Joined: Wed Apr 02, 2014 5:49 am
Location: Barry, Glamorgan, UK
Contact:

Re: aeg wood stock fit WE m14

Postby Dom_e » Sun Aug 21, 2016 7:01 pm

Sounds like you need a friend in the US ;) if you have no luck let me know, sometimes I get orders from customers over there and they ship parts to me that aren't available here.
Custom airsoft guns and ready-made kits: http://vintageairsoft.wordpress.com

Buy kits here: http://etsy.com/uk/shop/VintageAirsoft? ... _shop_menu

You can also LIKE our page on Facebook: https://www.facebook.com/thevintageairsofters
User avatar
SCVNGR
Veteran
Veteran
Posts: 125
Joined: Tue Nov 18, 2014 11:48 pm
Location: New Zealand
Contact:

Re: aeg wood stock fit WE m14

Postby SCVNGR » Mon Aug 22, 2016 12:29 am

Just to clarify: you wish to fit a GBB M14 into an AEG stock?
If so, that is a much simpler operation than fitting a AEG to a GBB stock
b54gun
Just Out of Training
Just Out of Training
Posts: 23
Joined: Sat Nov 07, 2015 4:22 pm

Re: aeg wood stock fit WE m14

Postby b54gun » Thu Aug 25, 2016 7:43 am

Thanks for all the replys guys , got the aeg stock and i see what you mean about them being thin plus a soft wood so wont be going that route , think il end up leaving the plastic stock on lol

Return to “WW2 Airsoft Weapons”

Who is online

Users browsing this forum: Bing and 3 guests