Page 1 of 1

Bren MK1m, My interpretation

Posted: Tue Mar 10, 2020 10:09 pm
by Lazyboy
The gun is made of Aluminium

It has an airsoft 650mm barrel, with a modified hopup.

HPA powered through a computer controlled custom built engine

Rate of fire is 480 rpm

Magazine holds 110 rounds.

Electrics powered by a 12 volt 600 mAH battery in lower body.

Initial testing on 75 - 80 psi, has it shooting at 1.38 joules, firing .4's and was firing 60 metres +.

With .25's, they were over hopping with the no hop on, have been told a softer bucking may solve that.

Firing hot so with turning and lighter BBs should get it down to safe levels



Here is a video, showing stripping and dry firing the gun

Re: My interpretation of a Bren MK1m

Posted: Fri Mar 13, 2020 12:58 pm
by Lord Elpus
I can’t get photo’s up, but did get on the link, looks great! Well done! Put up more pic’s!
Andy

Re: My interpretation of a Bren MK1m

Posted: Sun Mar 15, 2020 10:58 pm
by Lazyboy
Lord Elpus wrote:I can’t get photo’s up, but did get on the link, looks great! Well done! Put up more pic’s!
Andy

Thanks
I have replaced the photos, so hopefully you can now see them

Re: Bren MK1m, My interpretation

Posted: Tue Mar 24, 2020 5:07 pm
by dadio
That's a superb build well done good sir :good:

Re: Bren MK1m, My interpretation

Posted: Tue Mar 24, 2020 10:55 pm
by SCVNGR
Did you make the body yourself?

Re: Bren MK1m, My interpretation

Posted: Thu Mar 26, 2020 8:51 am
by kingmaker
Top class work there,like the sound and rate of fire,very realistic. :happyclap:

Re: Bren MK1m, My interpretation

Posted: Fri Apr 03, 2020 11:45 pm
by Lazyboy
Thanks for your replies.
SCVNGR yes I did make the body.
The flat pieces where sliced from my 3D model and laser cut, then glued and riveted together, other bits are welded.
The round bits were made on a lathe.