Smle kit

A place to discuss WW2 airsoft guns.
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 673
Joined: Fri Sep 16, 2016 9:48 pm

Smle kit

Postby Lord Elpus » Sat Jun 23, 2018 4:14 pm

Signing on for the September game, has spurred me on to finish my smle, been a bit slack on it this last week, but managed to do some today, as well as MOT on car!
Made sight mount and protector, cut out for charger clip on receiver.
Andy
Attachments
IMG_0983.JPG
IMG_0981.JPG
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 673
Joined: Fri Sep 16, 2016 9:48 pm

Re: Smle kit

Postby Lord Elpus » Sat Jun 30, 2018 8:08 pm

Spent two hours today, making new metal charger bridge, to replace the rubber one that Warren supplies.
Attachments
IMG_0995.JPG
IMG_0994.JPG
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 673
Joined: Fri Sep 16, 2016 9:48 pm

Re: Smle kit

Postby Lord Elpus » Sat Jul 07, 2018 8:45 am

A little bit of work on the rubber mag supplied in kit, not too impressed with it although a good idea, it does come with" aero chocolate bar " factor, so a bit of filler is needed. Might start looking for metal replacement later on.
Attachments
IMG_1003.JPG
IMG_0999.JPG
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 673
Joined: Fri Sep 16, 2016 9:48 pm

Re: Smle kit

Postby Lord Elpus » Sat Jul 21, 2018 12:43 pm

Just spent the last two hours trying to get this thing down to 350fps, best I can get so far is 370, try and get below, the piston is then slopping about in the cylinder and the holding pin for the spring guide just drops out because there is no spring pressure to hold it in!
Now that piston slopping about is not doing my pop gun any good at all! Have tried weighting the piston but minimal difference, will have to try a spacer to take up the "slop".
The annoying thing is at about 450fps this fires sweet! Has tightbore and airsoft pro hop unit fitted and using .30's- 32's has nice long accurate shots.
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 673
Joined: Fri Sep 16, 2016 9:48 pm

Re: Smle kit

Postby Lord Elpus » Sat Jul 21, 2018 12:45 pm

Perhaps the tightbore and hop unit are part of the problem,
Attachments
IMG_0146.JPG
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 673
Joined: Fri Sep 16, 2016 9:48 pm

Re: Smle kit

Postby Lord Elpus » Sat Jul 21, 2018 4:00 pm

I now have it down to 335-348fps, with the odd shot at 352, so it fluctuates a bit at the moment. Will have to put some through it, to see if it settles in. I really don't like it being this low, as soon as the game is over, it's going back up to 450-480fps.
Played a bit with the hop still getting a good distance though it seems to have suffered in accuracy, but time will tell on that after using it a bit, and sorting out ball weights.
Gave the stock its first colour on stain, using Colron "Georgian medium oak" on this one not so dark as the Jacobean colour that I have been using.
Attachments
IMG_1027.JPG
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 673
Joined: Fri Sep 16, 2016 9:48 pm

Re: Smle kit

Postby Lord Elpus » Sat Jul 21, 2018 4:03 pm

When dried, will use beeswax for a sheen, if this works to my liking, it's nearly done!
Attachments
IMG_0148.JPG

Return to “WW2 Airsoft Weapons”

Who is online

Users browsing this forum: No registered users and 2 guests