V2 gearbox rebuild, then......

A place to discuss WW2 airsoft guns.
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 911
Joined: Fri Sep 16, 2016 9:48 pm

V2 gearbox rebuild, then......

Postby Lord Elpus » Sun Sep 22, 2019 1:08 pm

A rather big OOPS!, built up a gear box for a project, so I thought well at least I won’t have any problems with the gearbox when I come to running the gun......all built then thought I’d test it.......lasted approximately three minutes
Attachments
BDFD8494-8CBF-49CA-9C47-2EE423639A87.jpeg
9A72761A-9AC5-4C90-BE7F-5FC790F4A853.jpeg
Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 911
Joined: Fri Sep 16, 2016 9:48 pm

Re: V2 gearbox rebuild, then......

Postby Lord Elpus » Sun Sep 22, 2019 1:10 pm

Luckily I have more cases, which is just is just as well with the wonderful V2 gearbox, I’ve not known this happen to a V3 box .....yet.
Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image
MCLMM
Just Out of Training
Just Out of Training
Posts: 20
Joined: Tue May 10, 2016 2:15 pm

Re: V2 gearbox rebuild, then......

Postby MCLMM » Sun Sep 22, 2019 3:06 pm

Blimey... What's the V2 box for, build wise?
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 911
Joined: Fri Sep 16, 2016 9:48 pm

Re: V2 gearbox rebuild, then......

Postby Lord Elpus » Sun Sep 22, 2019 6:04 pm

It will be put into a Johnson 1941 LMG, have collected most parts for it now.......I think, just got to get the side feed sorted properly, it won’t be 100% correct but it will be near enough to look right.
Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image
kingmaker
Veteran
Veteran
Posts: 165
Joined: Sun Mar 01, 2015 7:42 am
Location: Boston ,Lincs

Re: V2 gearbox rebuild, then......

Postby kingmaker » Thu Oct 10, 2019 11:27 am

Hi looks like G3 or mp5 a4 body ,do you want that selector lever i am after one of those,sell it to me please
Image
Image ImageImageImageImageImage
kingmaker
Veteran
Veteran
Posts: 165
Joined: Sun Mar 01, 2015 7:42 am
Location: Boston ,Lincs

Re: V2 gearbox rebuild, then......

Postby kingmaker » Thu Oct 10, 2019 11:29 am

what brand is the v2 case?
Image
Image ImageImageImageImageImage
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 911
Joined: Fri Sep 16, 2016 9:48 pm

Re: V2 gearbox rebuild, then......

Postby Lord Elpus » Thu Oct 10, 2019 12:18 pm

That would be a JG G3 lower receiver, and I do have a spare ........somewhere, I might not be using this lever anyway as I think the project gun has it fitted on the other side. So if I can sort a change round I will.
Andy
Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image
Lord Elpus
Fought at the Somme
Fought at the Somme
Posts: 911
Joined: Fri Sep 16, 2016 9:48 pm

Re: V2 gearbox rebuild, then......

Postby Lord Elpus » Sat Oct 12, 2019 1:28 pm

kingmaker wrote:what brand is the v2 case?

Sorry didn’t read this, unknown make on that gearbox case, just rebuilt in another case, again unknown.
Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image
kingmaker
Veteran
Veteran
Posts: 165
Joined: Sun Mar 01, 2015 7:42 am
Location: Boston ,Lincs

Re: V2 gearbox rebuild, then......

Postby kingmaker » Wed Oct 16, 2019 10:34 am

I think a radius on the front corners of the v2 case cylinder window is a must if you have the gun apart for any other jobs,can help stopping a potential a crack like you've had they are known for that problem.Apparently batches G+G Casings started to crack a lot a few years back,said to have fixed the issue. i think metal grades or quality can vary.Also with mass production a drop on material spec may save loads of cash for the manufacturer.
I have a 2016 G+G v2 box that is the only one i have seen that is pre-radiused in production,well it appears manufacturer done i could be wrong.
On a zero dergree winter game i tend to go for a gun with a v3 box,does not crack where the v2 box allways does
Do you have any sorbathane to pad your cylinder heads Mr Elpus? it can be very expensive and hard to buy in UK in small quantity.the stuff sold for hi-fi buffs is too soft.
Image
Image ImageImageImageImageImage

Return to “WW2 Airsoft Weapons”

Who is online

Users browsing this forum: UDiscovery and 3 guests