Finally rebadged my red beret from Ox & Bucks Light Infantry*...
*First to say why OBLI gets a sweetie.
obli ,dont know what it means but im all in favour of sweeties
Erm, Ox & Bucks Light Infantry perhaps 
A Proud Member Of 'Team Spleen!' who play mainly at Gunman Airsoft, Tuddenham, Suffolk.
Not really WW2
But managed to edit a video i filmed on the 6th at Drakelow tunnels
http://www.youtube.com/watch?v=9Lwp9Xrw ... ideo_title
I think it turned out ok 
WW2 Weapons AGM Sten, AGM MP40
Fitted my sten with a seleton stock, just hope my lipo battery & charger turn up in time for the weekend so I can use it like this.
OOh Pete, I like that! Where did you get it from?
You've got nothing to ein, zwei, drei, vier
OOh Pete, I like that! Where did you get it from?
I got it off ebay, I'd been looking for one for months.
Before I got this it was suggested to me that Chelmsford Militeria might have some, I did actually speak to the guy who runs it but he was just off on holiday he said to email him and he'd check when he got back, however this one came up before I did, so if you're after one it may be worth contacting him to see if he's still got any.
Does it have the same fitting as an airsoft one? (Viva, in my case.)
You've got nothing to ein, zwei, drei, vier
The fitting is different but with a small amount of dremelling/filing it can be made to fit, I'll take some pics when I get home.
All the ones I've seen have a hook on the bottom, rather than the short T-shaped "rail".
The fitting is different but with a small amount of dremelling/filing it can be made to fit, I'll take some pics when I get home.
That'll be handy - I have one of the skeleton pistol grips I want to try, and that has the hook too.
What did you do about the large hole where the screw goes?
I found a large washer which I trimmed to fit, it's a temporary solution until I can get a proper spacer sorted
As you can see with just the standard screw in there's potential for the stock to slide downwards, the spacer I intend to fit will deal with that.
This is the hook on the stock I've filed it but not much.
This is where I've dremelled & filed the slot just needs a bit of tidying up.
Could you measure the diameter of the hole, and thickness of the metal where the hole is?
I'm planning to make a spacer/washer for the pistol grip I have.
...made a couple of spacer/washers for fitting real Sten stocks to AGM Stens.
good to hear you on the mend fella, a month at home would drive me mad 
cheers 
Had a wander around the old Blanco factory - nothing to see related to manufacture now but still, felt the vibe. 
Had a look at a small collection of Joseph Pickering products, most of which I've not seen before - further visit required for interviews and some photography I think...
... went to Bovington with Stof and John as 6 RTR. Good day. 
You've got nothing to ein, zwei, drei, vier
woke up with a stinking hangover 
bloody works xmas party 
now off to work 
Made a helmet net for my SSh40 out of sting. Will have to see how well it holds undergrowth
Had a day trip to Lancashire thanks to work...
A Proud Member Of 'Team Spleen!' who play mainly at Gunman Airsoft, Tuddenham, Suffolk.
Repaired and reasembled my Tanaka seems to be working fine, disconnected safety switch on MP40
sorted all my brass and leather work from my Home Guard Uniform, doesn't look as if its come straight off the peg now at SOF 
prepared my heer kit for a shake down at ground zero tomorow takeing on the m4 massive wiv me mp40
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
