I know these mags have been in short supply for some time but does anyone know where I could get my hands on a couple ? 
i had to resort getting some off members on the forum, and am still waiting for a reply from kalashnikov_kid as he had some going spare as well. The only places i have found in stock of these is in America at Evike.
http://www.airsoftpost.com/product_info.php?products_id=28044
$7 though is a bit crap expecially as RSOV was selling them for $5 for 2 Mags!
I was looking at maybe trying to get a G&P Mag one like this to fit
Hold more rounds but are alot more expensive. But it was what the AGM ones were based on.
EDIT: just searching for the G&P picture brought up the AGM 14 rounder in stock at the same website. Never have dealt with them so can not rate.
$3.49 is alot better!!!!! 
Hope this helps.
Stu
I've used airsoft-club with no problems so far so you should be alright ordering from them
German
Russian
British
Japanese
Thanks very much chaps
didnt see much point in starting a new thread but have started to convert my mags.
first is a picture of one end of the mag. This end is nearest the hop on the m14 it has 3mm thick plastic glued (with polyester cement? Melts plastic together... anyway) shows the filing done.
This picture is from the same end but of the side. Please note how thin the it is at top. As long as u let every dry it will stay nice and strong. I must of done about 200+ mag changes now and its still going strong.
Next picture is the other end of the mag. This end is fitted nearest the mag release on the m14. And shows the material removed.
And again from a different angle.
Lastly you need to take the round hole situated on top of the mag so its flush I have already done this in the pictures but from the image below you can see what has been removed
Picture of mag in the gun. Please note doing the above will lead ur mag to snap in with 2 nice clicks.
and again with flash
lastly in the above picture i had to file about a mm off the bottom corner of the mag nearest the mag release as it pressed in but got stuck and only with immense force could you remove it. Hope this helps in your conersions.
Stu
