Have just ordered my MP44
http://www.rsov.com/express/product.php ... cateId=131
Its gonna be a little hot when it arrives so Im wondering which spring do I need to downgrade it?
Our site allows 350fps but obviously I would like to lower it for CIA events 
Also, RSOV have no spare mags at the moment, anywhere I can order a couple?? (with Paypal?)
cheers
Rob
ooohhh not seen this one, thanks for the link.
Either a M100 or M110 would probs be enough dependant on the other internals. To give you 320-350
cheers what make of spring would that be? seems to be different numbers for different makes 
also will be leaving the internals as standard for now
cheers
also will be leaving the internals as standard for now
No worries but i dont know what there standard internals are like if its running at 400 fps then it would need some decent compoents in there to keep it at that fps without destroying something in your gearbox. Each brand always has different limits a prometheus m100 is probably the eqilivant of a M110 by Madbull as example. From my own experience Promethus springs are always quite pokey but then settle down and slowly get worse over time. Although a Madbull spring again from my own experience will give you a slightly lower FPS than a Promethus but will stay consitant for a lot longer.
Also after doing a quick search i could not find any mags related to your gun for 100%. Although at a guess
http://www.airsoftpanda.com/advanced_search_result.php?keywords=mp44&osCsid=d4bo5on9l4urg7ahmsqa6623k0&x=0&y=0 looks like your MP44 for $175 and the magazine underneath i presume works for that gun at $12 a pop.
cheers for the link have ordered one mag for now, never dealt with them before so will re-order the 3 pack when they are back in stock
cheers for the link
I never have ordered from them either but know people have on the Zero In forums that have and as far as i am aware never had a problem with them.
Goodluck!
cheers fella
Personally I've usually used M90 springs. I find M100 just a bit too powerful in most cases and don't mind running at sub 300fps.
They often say "If you've not got the range move closer to the target".
Also M90 are a lot easier to fit, I found that with an M100 it can be a right ball-ache getting the gearbox to close. With an M90 it's as easy as pie.
if you use rsov then the element 115 spring is cheep and about right fer 330-340 fps,mutch over that and your gun becomes high maintenance.
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
I think I remember downgrading my mates mp44 with an element sp105 spring, that seemed to do the trick
ok people, have now ordered
'Element' Standard Full Tune Up Kit for Ver.2
'Prometheus' MS100 non-linear spring
'Hornbill Products' stainless steel gearbox shim set
when the AEG arrives I will have a good look at it and possibly replace the barrel and hop-up unit
In my AGM StG 44 i am running an m90 which gives me a mps reading of just below 105 so circa 340 fps if the gearbox on this is of the same make as my agm i would expect it to still be hot with an m100.
Cheers Pixy, will get mine on the crono when its done, I can always swop the spring out for another
be interesting to see if aeg are the re-birth of agm moved from mainland china onto hong kong island to get round the law,it would seem likely but only a comparison will tell,if it is then they may bring back the whole range as and when they get up and running.
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
I will ask my mate to bring down his AGM version and get some photo comparisons, should be quite interesting, may also put together a tutorial about the up grades Im doing on it with pics as well to help other people
Just another question, which sling do i get for it? standard K98?? 
Just another question, which sling do i get for it? standard K98??
Dont know alot about the German side of Gear, but i am swayed to say that a Mp40 Sling might of been used. I know they are different to a K98 sling but not sure of the differences.
An MP40 sling wouldnt fit it, it has the slot in the butt stock like the K98
I don't think an MP40 sling is long enough.
I have seen a few statements that K98 slings were used.
Yes, they use the standard K98 sling (There has been talk on gun forums/re-enactment forums about a few rare examples of special Stg44 slings made, but it turns out they're probably fakes or post-war variants that happen to fit).
A Proud Member Of 'Team Spleen!' who play mainly at Gunman Airsoft, Tuddenham, Suffolk.
