hi all,
this my first post but not the least.
Remender that i'm french and my english is a bit poor, don't hesitate to correct me.
The goal
Acad plans
http://droopaille.free.fr/Airsoft/M2/BrowningM2.dwg
http://droopaille.free.fr/Airsoft/M2/BrowningM2.dxf
First cardboard model
Not the goog ammobox but i have nothing else
Cut in 1.5mm steel plate. White lines are the groove for the folds
Folding are made with a simple vice.
The first blank assembly. It makes 60cm long.
Pre cut of handles.
Different sizes of steel tubes for barrels
Find on FranceAirsoft, a paintballer who bought the external part and sold the inside
In this case of luck, in french we say : "i have the ass bordered with noodles"
Yes i know it is a french expression literally translated which means "i'm very lucky"
First try for the holes, very difficult, my drill is turning too fast.
The solution was a hole saw.
it looks very good so far , keep us posted with the project
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
Drilling and taping of rear plate.
The wood part of handles.
And far time later, i made them round : it is nicely.
The trigger is finished.
Different parts of barrels :
- front plate
- airsoft barrel with hopup bloc
- barrel (750mm)
- barrel guide
- heat shield
Very nice.
You could probably use a longer inner barrel (you called it the airsoft barrel) if you have problems with the short one you have.
the gearbox is fixed with a simple steel bracket and 2 screw
With the same steel, the bow support
And welded
Good job ! (TIG welding)
This parts for in inner ammobox with 4mm polycarbonat, just cut with a hand saw and a ruler
I add the inner part of M249 ammobox
The space reamining is for battery
Near the finish
Empty
Full
Little game : how many bbs at your mind ?
Little game : how many bbs at your mind ?
I guess at 12000 BBs!
A Proud Member Of 'Team Spleen!' who play mainly at Gunman Airsoft, Tuddenham, Suffolk.
Nice work 
Free speech is expensive these days!
Thanks,
You 're the first who give a right answer : on the pic, there are 10k bbs, but i can full up a bit more.
The rest.
Electrical supplier from M249 ammobox
inside the box
electrical plan : one push, two action (fire and supply)
In real, it is a bit less sexy
The front plate very barrel support
little guide for the inner barrel, turned in plastic
The most difficult part : adjusting the gearbox with hopup bloc and front plate
First video from fire test
http://www.youtube.com/v/dn_EDRNBUg8
BB supply
http://www.youtube.com/v/-wnVHMHxzn4
Real fire test with BBs
http://www.youtube.com/v/zOe7TiSzSsQ
With the boby
http://www.youtube.com/v/NsR4wKfwlNI
Looks great. Can wait to see it on the battle field
thanks
there is no creation on the spring, it is just put on the tip of the magazine receiver (the little rond part wich go inside the magazine hole).
The end of spring is a bit larger and match with this part diameter. It is fixed on the piece between the hop and the gearbox. You can better see it on pics of killbuckett
You can also wait a time and look to my 1919 DIY, i had modified this part.
just a teaser 
Rest and end of this project. In fact, i haven't finished the machine gun. It is usable but there is no finishes, no paint ...
folding the cover hinge
The end of welding support.
Fixed the kneecap with a salvage part of pneumatic cylinder.
Holes for cables and spring loader
nearly the end !!
http://www.youtube.com/v/m3fFXVWGGRs
16.2 kg - 1m45 of steel for outing everybody : you shall not pass !!!!!!!
This is a tripod for having fun quickly but not cute
the heat shieldIt miss the maiden
In modern situations
really looks the part , well done , how heavy is it ?
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
16.2kg without bbs, battery and tripod
just as well it's vehicle mounted 
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
MG08/15 was something like 20kg without ammo - guaranteed to put hair on your chest!
Im going to try and build a .30 out of abs. I have decided on an easier feeding mechanism.I will use an src m4 with a high torque motor and simply line up the mag well so that you can slot magazines into the side. then I just have to modify some m4 mags.
Hello Droppable
Sorry for my bad English
Really liked your project and would like to download
The link says it has an error, do me you can help if you please 
Hi,
I'm Droopaille not Droppable
I've modified the link you should load it now
