That clip shows a nice demonstration of gunner and loader doing magazines change drill , thanks for linking it

Last magazine finished , I did forget something though , the carry handle should lock out to the side of the gun for "from the hip" shooting...

That's looking really good , the bipod came out very nice indeed . A two person MG team is not just to make it more real life ,it also serves another ...

That sounds like fighting talk !

Yes that was a bit of a fluke, when first fitting the arm thought “ here we go, grief “ but was almost there straight away. Whole thing is nearly do...

Cool ,I'll print them up and let you know when they are ready .

The cocking handle position looks just right

The old S+S No4's have a lot going for them , the breech casting is a great part , most people struggle with the joint between the Butt and the rest o...

I find that grinding flat heats and de-tempers the end of the spring enough to bend it flat with pliers if needed , sometimes you have to clip off so...

My own No 4 has an interference fit mag , been using it for some years now and its still just right , I might not do it for a customer build but it wo...

I've cut coils off many times ,with variable pitch springs I cut the close together coils and grind flat on a bench grinder , as long as there's no sh...

A nice pile of goodness for the gearbox . it was shooting 287 fps , now 363 fps , its going to settle down a bit over the next few days and should be...

Nicely done ! Now don't b ashamed if it suffers from the WW2 support weapon curse nearly half the support weapons that start the day at a WW2 event ...

Fingers crossed

What you can do with the mags is profile the edges , the BB channel is in the middle so the two long bottom edges fan be rounded off , I user some w...

Took a break from Bren mags to do this SA58 monstrosity that Simon wanted as well .

You have a K98 and now a lovely Mg34 , well set up now for the German side !

Test fired the Bren today and it fed beautifully so I moved on and made another mag and tested that one and it fed perfectly as well . One more ...

Its annoying that genuine woodwork on either the NO4 or K98 both just don't quite have enough meet underneath where a vsr mag has to sit , strangely t...

Is there no support at all between the receiver block and the hop unit on the S+S ? On all the custom bolties I've done I always left a bit of the out...