Yes thanks will try the trousers,cap could be good as.helmets get hot and heavy as the day goes on. Mark vickers

As regards the trousers i am 5ft 6in tall and 32 waist,so everything is massive on me, Spare mp44 mag pouch may help, or i may not need it due to the...

Hi Seg Hopefully my booking is confirmed courtesy of Matteywheels,however my kit is German not Alied. Also i have not been to a ww2 only airsoft event...

If the hop unit is a zinc metal type,get a 6mm drill bit and if the plain shank is new and Smooth, insert it in the feed hole where it mates with the...

[link][/link] Here I am machining the cooling slots in the foregrip .The rounded shape would make the use of a router difficult,A milling machine is ...

[link]URLimg class="go2wpf-bbcode" src="http://i1344.photobucket.com/albums/p646/stgeorge2/DSCF5817_zpstxjwkjg3.jpg">[/URL][/link] On t...

[link][/link] Here you can see I have carved the stock former from oak,I am using 0.9mm steel for lightness. Place the former on the metal and add 19m...

Hi Raffles the bipod on the real gun is a complex shape,a one piece steel stamping.as a one off I have had to improvise,and make it in Two parts a st...

The FG42 is famous having a number of relatively modern features for its day all in one package,even if this gun did not show all of these ideas 1st....

[link][/link] [link][/link] I used a 1 inch bar pressed into a wooden vee shape with a fly press this folded the butterfly design reciever into the u...

[link]/link] [link][/link] Here is the rough shape of the receiver,the rounded section at the top was formed by the 1 inch bar in the press.The L shap...

[link][/link] TM COMPATIBLE M14 gearbox,nearest to the shape i could find to get the look i want.The two ALU blocks are attatched with a steel pin at...

[link][/link] This is90% complete only there are still rough bolts and tape holding it together.I can post more pics of how It is constructed if an...