Beauty is in the eye of the beholder I suppose. He must have more in his eye than just beauty!

Some more ideas for you:

can the ammo boxes be mounted on the side of the gun? IIRC, it's the same setup as the M2HB - There are no fixings on the gun for a box. The ammo box,...

More info here, including a circuit diagram: If I read it right, there's no easy way to tap into the audio amp, and the speaker looks like a line-po...

It doesn't do FM, unfortunately. Neither does the RA17 I used. If you tune an AM receiver off just to one side of an FM signal, you can pick up the f...

Actually, the bipod puts strain on the barrel JACKET, not the barrel which in reality should be floating (I think it's part of the recoil mechanism, j...

lol no sellotape, but it does involve a 'micro power' SW transmitter with a range of a few metres, like the FM ones you get for cars. Be careful. I'...

also how much do the tripods sell for. Real ones, $379.95 (M2 .30 Cal. Tripod Less T&E & Pintle):

Well the plastic gears didn`t like an M95 spring Or did they like it so much that they stripped?

Thanks for the vid. Is there something wrong with the mic, though? The sound trails off occasionally.

Extreme-fire use the IRF1404 in their MOSFET switches. Select-fire and burst modes would need a sensor so the microcontroller can count shots.

Vickers I can manage:-- attachment is not available --

BTW, Maplin won't have the MOSFETs you'd need - I've already looked for my own use.

The hop unit will NOT fit the Cyma without modification. It looks like the mounting tabs and the plastic ring in front of the hop would need to be mo...

The "0.30 cal book" (which you can get via the last link) has the dimensions laid out. If you can't see them, I would suggest you shouldn't...

If you fit MOSFET units, the trigger switch ratings don't matter much.

The one with the 4 different periods is good.

Dunno if it helps, but this site says they were copies of the Finnish M31 Suomi drums:

Drum mag disassembly Too late for me, I've found out that the drum mag's rail comes off. This would make it MUCH easier to sand the parts to fit you...