thats the problem if the co2 bulb is venting straight into the barrel when the valve is operated it will be very inconsistent. airguns use a secondary...

with the steel bolt conversion you can safely use green or propane, which is handy as 134a is being phased out of production

if its the gas blowback m2 then its 134a only or the bolt will break as it has done.

work perfect in my sten, wont fit my bakelight agm mp40 at all

as above the asg is a marushin not a copy, and its a m2 if you look at the photo closely has the semi/full fire selector meaning the curved mag and ba...

the finnish is better than the ics ,and much more like the real gun with its steell phosphated body and genuine welds. if you dissasemble the ares eve...

firesupport is where i get my excell.25

i was holding out for one of these for ages after convincing myself that the ares wasnt worth the effort ,even though i hadnt seen the ares in real li...

yes that is the problem , i just glued a 1mm piece of plastic on the top of the adjuster and it worked fine. the hop wheel was very loose on mine so i...

have you refitted the spring that slides over the barrel and sits behind the hop assembly ,if its there then the hop should sit tight against the gear...

more importantly when are they releasing it

yes but at 109$ for a similar gun to a cyma its cheaper than the lpeg rubbish being sold by, bb buns for less

ill take this pm me your paypal