Rubber band for German helmet

You can make your own - get a push-bike inner tube from Halfords. Cut once across the diameter, slit lengthwise then open flat. You can now slit to appropriate width and cut the length to suit your helmet circumference. Join with puncture repair glue. You will have enough for all your mates too. Of course, makes more sense to get hold of a used and punctured tube if you can...

As above, I just got an old inner tube from my local bike shop. I reinforced the glue join with a few stitches. Great bit of kit which allows the full shrub on top of the head look.

Cheers
Martin

Thanks for the advice. Will have to go down that route as the only supplier i found on the net was sold out.

Is there a Decathlon near you? They sell dirt cheap bike inner tubes.

Cheers
Martin

Unfortunately not but a halfords is not far. Will try my luck there. Thx.
Cheers
Lutz

Lutz go to Halfords and ask for an old one that they have repaired I have often gone there and they give them for free

Hi Gordon,
Good advice. Got some free inner tube from Halford. But you did not warn me how dirty they are
Anyone need a rubber band? I will see how many I get out of it.
Cheers
Lutz

Well, it is only a bit of dirt. You'll be wanting to get your helmet dirty anyway.

Cheers
Martin

You'll be wanting to get your helmet dirty anyway.

You'll be wanting to get your helmet dirty anyway.

Ooh er missus

Walked into that one didn't I?

Cheers
Martin

wont say no to one rubber tube not your helmet