hey guys mr name is henry cake originally from portsmouth but now dwelling in christchurch new zealand! really trying to get ww2 airsoft going over here and seems to be going well so far i just thort itd be a good idea to see how u guys run things....which is very well from what im seeing so far!
also trying to get my grimmy mitts on a AGM sten gun but alas, the law in nz says that it needs to be semi only and ther not easy to semi...so if u know of anyone that could help me thatd be grand! otherwise...see u on these forums!
regards,
cake
Kiwi airsofter, just pew-pewing.
Welcome to the forum Henry.
Hello and welcome 
Hello and welcome 
Welcome and good luck with the sten. 
Free speech is expensive these days!
Hello and welcome.
You've got nothing to ein, zwei, drei, vier
Hi Henry, welcome to the forum!
When we were a Kingdom it was run by a King
When we were an Empire it was run by an Empress
Now we're a country we're run by a..........
Hello & welcome!
A Proud Member Of 'Team Spleen!' who play mainly at Gunman Airsoft, Tuddenham, Suffolk.
And once again, hello and welcome to the forum 
Hello and welcome.
Martin
"Mistakes in the initial deployment cannot be rectified" Helmuth von Moltke
Toys: AGM MP40, Cyma M1A1, TM M14/G43/SVT40, TM VSR/K98, SnS No. 4, ASG Sten, Ppsh.
Arnhem3,Gumrak,Campoleone
hello and welcome
"Take that you rotton helping of strawberry flan!"
Joseph Porta to "strawberrys and cream", in the sven hassel book ,ogpu prison
hi mate
with reference the sten problem ,ive made a few stens with fire selection as custom guns ,i used the whole m14 gearbox with the selector assemble still in place ,the trigger housing assembly has to be wider to accomadate but the agm is wider anyway to accomadate the width of the motor , it just depends how mutch you are prepared to compromise,there's a whole thread on useing electronics to lock a sten on single only with no definate solution ,if you are really interested i can post pictures showing how i did it ,but im not imediatly able to go into producing the nessary parts as ive got rather a lot on at the moment.
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
hi mate
with reference the sten problem ,ive made a few stens with fire selection as custom guns ,i used the whole m14 gearbox with the selector assemble still in place ,the trigger housing assembly has to be wider to accomadate but the agm is wider anyway to accomadate the width of the motor , it just depends how mutch you are prepared to compromise,there's a whole thread on useing electronics to lock a sten on single only with no definate solution ,if you are really interested i can post pictures showing how i did it ,but im not imediatly able to go into producing the nessary parts as ive got rather a lot on at the moment.
cheers dude yeh that wud be much appreciated mate! any help is helpful haha
Kiwi airsofter, just pew-pewing.
well as promised some pics ,the basick idear is that inside the main tube i have run a section of slightly smaller gage tube onto whitch are mounted the cocking handle,small sections of fake spring seen through the slot on the main tube and at the rear end an L shaped brackette that pushes the original m14 conecting bar at the back of the gearbox that takes the movement of the selector to the switch side of the box.this is used to give single or full auto by moving the cocking handle forward or back,ive fitted a micro switch to make a safety when the handle is pulled fully back.for your needs all you would have to do is weld in an L shaped brackette inside the main tube that permanently keeps it in semi ,there would be no need to make it as complicated.the trigger assembly housing has to be wider as seen in the photos ,but ive tapered it slightly to reduce the visual impact and in profile its not glareingly abvious.hope this is of some use.
ive taken the motor assembly off in some of the pics to make it clearer
ps if admin want to move this to more apprpriate place feel free,so long as mr cake can find it
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
