could it even be a sten with the picture reversed (often done for artistic reasons),the point at the beginning was is there photographic evidence ? un...

first three stages ,the plans make this easy ,print them one to one scale and paist on to the steel tube.or it would have been but when i tried the fi...

it may sound simple but many coats and really work it in ,a brush is no good you need to rub it in with a cloth.

if you move the feed tube you get a weakness at best and at worst feed or seal problems,i prefer to move the hop adjuster as its less stressed as a co...

really well done good job.you know if manufacturers start makeing all these ww2 gun's it will in some ways be a shame as all these projets wil end ,or...

they would be easily made on a lath out of acetile or nylon provideing you have a small enough parting tool, probably 1mm width would do to make the g...

or run it on a 7.2v ni-cad raidio control car batt,they even have tamia conectors and should charge from an airsoft charger,that way is a lot simpler ...

im looking for two pistol grip's of the plastic type for thompsons if anybody has them im willing to pay straight away.not the front type but the ord...

i think i would be a little disapointed if you didnt have to cock it each time,just my tupence worth, i hope its not electric unless you still have to...

god i hope its number 1, gas or spring ,looks like a number 1 in the pic as it has the extra sight in the forward possition,to be super optomistick m...

I've got one of these now and they have a number of faults, think hard and listen before investing. 1. The magazine gas fill valves are a bit hit and ...

awsome and for £30 thats just amazing well done

for the bracket on mine i used a 1.5 inch steel pipe cut to the right length and welded a m10 nut into it ,then used chemical metal(an epoxy putty) to...