cheers. its actually the original svd barrel turned down at the front to fit nicely through the front hole in the stock. jay.

a few pics of the turned down barrel and front sight. also rubbed down the stock ready for refinishing.

many thanks guys. have got the front sight made and outer barrel sorted, and going to tackle the safety lever next. still waiting on some parts but im...

may well be up for this one if its after the 8th oct (on holiday). if stuck for a site there is a suitable one opened up down my neck of the woods run...

some more pics. action cover is done and just waiting on the dust cover to turn up.

i could but can imagine it will be a pain to adjust the hop while holding the bolt back under tension.

yes mate it is certainly a doable plan, and i think the maximum rod size i can use due to the amount of room is 6mm. The only problem then is the rod ...

Is the bolt carrier (the bit you're holding in the second pic) attached to the part that needs to be held forward? If so, on the real steel G43, a ro...

cheers fella. have looked at several mags, and the g&g sr25 50 rnd mags are probably the best to use. i used one on my 1st project and it fits int...

cheers andy, i promise to get this one finished mate

looks grate jay, still hunting that frount site but what i did find was the old set of woods that i had of you, including the frount band, your welc...

pm'd fella.

pm regarding ss tunic, ss m43 cap and luftyb sidecap insignia.

So, you have access to a milling machine again Jay? Looks nice. yeah pete, needed to start a project so i can look forward to going to work again lo...

just started my g43 project, thought i'd put it in here as it will only be a single shot springer. still a long way to go though.

....started a new project

here's mine. shotblasted the old paint off, then used a mixture of birchwood casey super blue and aluminium black.