One turned up this week. Will reveiw soon

Hi, Thanks for the reply. Looking around the net it is more likely that he was 22nd regement (there may have been some error on my part with the trans...

I have some from an old project

FYI the piston is not a half tooth but a V7 compatable one. Full sized teeth, just without the extra material on the left side of the rack. If you're ...

Got one inbound for a team mate. Will power down to sub 350 (on unrestricted shells) and fit a hop unit, then post results. Done a couple of nagants a...

trim down the float valve spring.

All I've been told is they are Kings arms. My supplier knows that I work on WW2 guns quite a bit and just mentioned them. They're quite large scale so...

Just finished mine, using all the parts you listed. Very pleased with accuracy and performance. Couple of things I did notice was; 1. The bearings w...

Only difference is the spring guide

Trigger mod is on the cards as of tomorrow. Guide will be up by monday. Here's an example of parts to use. Spring-http://www.rsov.co...

I use the white one personally. But if you have a newer pack of element H nubs they're both the same dimensions.

Like I said I ASSumed Sorry 229 is fine chap

Yeah could be a good idea. Common myth is that they have an mp5 inner barrel. In my first build I used a barrel that fitted and assumed that it was an...

AK hop mod for MP40 Quick note. This is how I do the AK hop mod and this is a guide to show you how it's done. Please read the whole guide before pi...