Remember that the socket goes on the battery. Plug on the gun. And if you're changing the battery connector, only remove 1 wire at a time from the ori...
You wouldn't believe how annoying it is to forget those!
It's all ifs, buts and maybes, but it'll take a court case to make the law more definite. At which point, the particular gun/ammo will be tested.
The recent report and recommended (NOT "legal") limits came about as a result of testing airsoft weapons and ammunition supplied by Firesupp...
...made a couple of spacer/washers for fitting real Sten stocks to AGM Stens. -- attachment is not available --
From what I gather, it's not a commercial thing, per se, it's the police trying to stop shops selling airsoft RIFs as air rifles, meaning no VCRA defe...
That's what needs to be done. There's enough area there for the joint to be strong. I would suggest connecting the plug you're going to solder onto ...
It stems from the definition of "Firearm" as a "lethally-barreled weapon", and the definition of lethality being "causing mor...
Could you measure the diameter of the hole, and thickness of the metal where the hole is? I'm planning to make a spacer/washer for the pistol grip I h...
All the ones I've seen have a hook on the bottom, rather than the short T-shaped "rail". The fitting is different but with a small amount of...
Thanks CW. It looks like it could almost be a variation of different batches.
Oh. I'd only heard of black ones.
The normal red ones. But the deans connectors aren't the problem, the wires are. There's no room for them to go down the side of the pack. As mine wa...
That's why I use the receiver LiPo. I just recently changed to Deans anyway, so I didn't have a problem there. The problem I have/had with the 850mAh...
Yes, but you omitted how tight it was...
I can now confirm that battery WILL fit in a Sten. But only just... The wiring needs to be jiggled around a bit, and I'd not like to try it with Tami...
I'm going to try one. I could do with a shorter one - the higher capacity is a bonus.
All I can say is it might. And it might fit better than the 850mAh I'm using: