M14 to M1 Garrand convertion kit,
EDIT<< can now offer converted M1 acm shot gun mags at £5 each, free postage,
cost still to be worked out etc,
construction,
fore wood and upper wood are high dencity resin casting, very strong and give a nice finish wight,
the matal parts will be bronze casting as normal, including the frount sight and gas return,
on a side note i,v allso fitten the last 65mm with a larger "bore" this has a nifty way of giving the model a nice deep sound when fired,
warren
edited
I,v got the first one finished, pics below the costings,
the below prices are for the AGM M14, not the TM M14, but this kit will allso fit the TM M14,
parts, the two "wooden" stock parts are hight dencity resin/fibe castings,
the frount sight and gas blocks are cast from original part in bronze,
the barrel parts are ally tubeing, sling swivel is real steal,
I,v brocken it down so you have quite alot to chose from,
BUT with the kit on its own you are required to either get the barrel turned down or hand file it down to the right diametor,
as you know I was going to do this as a gun only, but I know some of you like to tinker Wink
oppsions are,
A) Kit only, £125.00 p&p £10.00 (this is the DIY kit, barrel cut, barrel turn down, stock cut)
B) Kit and M14 £245 (DIY kit as above) post free,
C) M14 only £120.00 P&P £10.00
D) barrel turned down £20.00 free post if sent with kit,
E) Kit + GUN + Fitting £255.00 post free,
F) your M14 + Kit + me fitting it £155.00 P&P £10.00
G) matal work only, what you get is, replacement barrel, gas tube thats under the frount wood, gas return and frount site and frount swivel and band, recorded delivery for £70.00 these wount be numbered just stamped "S&S"
if you have any Q then just fire away,
#edit#
got the first bach nearing compleation, orders now tacken,
each gun will have it own number stamped on the under side of the gas return pipe,
complete guns will be "S02-1007" meaning gun number 2, completed oct-07
kits will be stamped, "K02-1007" K is for Kit,
normal UKARA rules applie when ordering complete airsoft models,
warren
team shoot and scoot, TL
very interested mate let us know the price asap
I'll have one mate
i,l get the pics up of the first one, tomorrow,
team shoot and scoot, TL
spill the photos mate hehe
any photos yet mate?
will do, i,v got a part ordered for the beasty so once thats in i can fit it all back together again and get the pics,
first run will be 10 guns,
team shoot and scoot, TL
Any pics of this yet mate?
i,l post pics up later next week, i,v had to re-issue castings so its held things up a little,
team shoot and scoot, TL
Looking forward to the pics Warren - I'm in limbo at the moment with a M14, M1 Stock, dremel, gas parts and wondering whether to buy u'r kit or try my own version 
once i get them in i,l finish the this working model and get pics up, i only need one part to do that,
and allso work out the costings, i,l work out the time it,l take to get the castings finished etc 
team shoot and scoot, TL
hey warren are you going to be doing the same as the k98's and provide a option including the gun as well?
cheers
i,l see may just offer the M1 finished to the first 10-20 guns, rather than kits at first
team shoot and scoot, TL
OK mate eagerly awaiting the pics heh. out of curiosity will you need us to be registered or something to buy from you post october ?
will do mate, its the normal thing i,m affraid as far as being a registerd player etc, 
team shoot and scoot, TL
What about parts kits, do we need to be registered for them ? 
What about parts kits, do we need to be registered for them ?
No only complete guns, as long as something can't be classified as a Realistic Imitation Firearm it's not affected by the VCRA.
well you can defo add my name for one complete gun. plus i should be registered soon as phoenix is filling the forms out for its members.
cheers
aye put my name down. not sure if it will be for a kit or the whole schebang. depends on price as always hehe
