A friend of mine has access & know-how to use machining equipment and would be willing to fabricate a No4 receiver, bolt knob and the part at the end of the bolt. I would now need some measurements and/or blueprints for this. Using a S&S No4 as a base for this, not looking to lengthen the receiver to correct measurements.
Help would be greatly appreciated 
Why do you always carry that umbrella?
-Bad memory. Never could remember the password. Knew no Jerry would carry one. Had to prove I was an Englishman, you see.
A bridge too far
I could probably digram up some photographs for you, wouldn't be exact but pretty darn close. Drop me a PM if interested?
Custom airsoft guns and ready-made kits: http://vintageairsoft.wordpress.com
Buy kits here: http://etsy.com/uk/shop/VintageAirsoft? ... _shop_menu
You can also LIKE our page on Facebook: https://www.facebook.com/thevintageairsofters
If you have a S+S no4 as a base gun and your not correcting the measurements then just copy the S+S parts ,bit of a shame not to correct it though and if you had the blueprints to the real no4 then it would all be wrong if fitted to a S+S gun unmodified .....
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
Dadio, how much work was/is it to lengthen the receiver? How much are they off? Going to search the forums for a bit for this as well.
Why do you always carry that umbrella?
-Bad memory. Never could remember the password. Knew no Jerry would carry one. Had to prove I was an Englishman, you see.
A bridge too far
Best way to judge it is in where the cocking handle is ,the handle is over the woodwork on the budget S+S and it should be over the jointing band between the wood parts ,its roughly an inch.
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
i,d rather not see my parts copyed
but good luck with your project
team shoot and scoot, TL
i,d rather not see my parts copyed
Aren't they identical in shape to the Enfield anyway? 
'ABSIT OMEN'
Yeah, I didn't use the warrens receiver at all for the model. Ended up measuring and putting together a model from pictures of the real one. The rest of the gun will remain as a "stock" S&S No4 though. So it will be a slightly modded S&S 
. Will probably do some modifications to the Varmint receiver as well. We'll see how it goes, my friend already made the bit at the end of the bolt (the squarish one). He's not sure if the bolt lengthening is possible without a lot off stress on the rod the end cap screws into in the bolt. The other way would be looking at how to lengthen the rod itself. I'm also looking into finding a Marui cylinder for it, apparently the rod in those is a bit longer than the Varmint one.
I assume the metal parts were blued on the real one? Dadio was recommending Birchwood's blueing on another topic, will see where I can source some.
Why do you always carry that umbrella?
-Bad memory. Never could remember the password. Knew no Jerry would carry one. Had to prove I was an Englishman, you see.
A bridge too far
