[OPINION] Mauser HS...
 
Notifications
Clear all

[OPINION] Mauser HSc by HFC

5 Posts
2 Users
0 Reactions
846 Views
askhati
(@askhati)
Posts: 264
Reputable Member
Topic starter
 

Link: https://www.uncompany.com/pageproductde ... odid=28224

Has anyone handled and/or skirmished with one of these before? Any opinions or reviews?

 
Posted : 22/02/2017 12:44 pm
(@lord-elpus)
Posts: 1038
Noble Member
 

I've got one of these somewhere, I thought I recognised it, must have had it for about 18 years or so, non worker, so it was a holster filler for all that while, fixed it last year, now fires. I'll find it put it through a chrono and report again, all plastic, non blowback as I remember, fired about 12 metres.
Andy

 
Posted : 03/04/2017 4:57 pm
(@lord-elpus)
Posts: 1038
Noble Member
 

Found the little Mauser, went straight to where I thought it was, first time! Most unusual normally hunt around for hours!
It takes 11 rounds in mag, curious little stick mag, you have to run down the spring until it catches at the bottom, the bb's then just roll in.....nothing holds them in at the top, when inserted it knocks off the bottom catch and feeds up the bb's. If you release the mag at this point they all just run out to the ground!
Put in some green gas, firing at 169-176fps, which is better than I thought, quite accurate in 10 - 12 meter range, the little gas tank run two and a half mags, about 26 bb's. Very light in hand as I said before all plastic, no gbb. Quite well made looks realistic not plasticky and nasty. If you're not paying a lot for these quite good value, shouldn't imagine you can get any spare mags or parts for them.
andy

 
Posted : 03/04/2017 7:46 pm
askhati
(@askhati)
Posts: 264
Reputable Member
Topic starter
 

Cheers mate.

Got mine from uncompany a few weeks ago, and it seems to have a leak somewhere - reservoir holds little gas, and I get about half a meter of range on the lightest of BBs :rofl:

Need to sit and strip the whole thing down at some point, but other matters have taken preference thus far.

 
Posted : 04/04/2017 7:51 am
(@lord-elpus)
Posts: 1038
Noble Member
 

That's the problem I had with mine, its the little rubber seal and metal top that's supposed to return to it's hole when it's fired, you'll have to pull it apart and give it a tweak, I think I filed a little piece off.
my one works fine now..........just took a decade and a half to get around to fixing it!

 
Posted : 04/04/2017 1:15 pm
Share: