This shiny metal piece:
Is a bit loose. Sometimes it sticks away enough that it will jam on the bolt return and will not allow the action to finish. This in turn means I have to be very careful when reloading and can't fire as fast as the rifle would normally allow me to. Is there an easy fix for this?
Kitwhore files: S&S Lee Enfield No. 4, AGM Sten Mk. II, Tanaka Kar 98k, WE Luger P08
Wishlist: AGM Stg44, possible LE No. 4 gas project
I get the same on mine so I removed it
Sent from my GT-I9305 using Tapatalk 2
Is there an easy fix for this?
Use locktight or a tiny drop of glue on the small 'pin&hole' holding the shiny-piece to the bolt.
Works for me.
Good idea will do that
Sent from my Nexus 7 using Tapatalk 2
And another case of wobble, this time from the scope mounting plate. I don't see any tightening screw anywhere there. Is there some in built way of fastening the scope plate or should I just superglue the hell out of it?
Kitwhore files: S&S Lee Enfield No. 4, AGM Sten Mk. II, Tanaka Kar 98k, WE Luger P08
Wishlist: AGM Stg44, possible LE No. 4 gas project
if you remove the breech and barrel from the stock you'l find 2 screws that hold the rail on that can't be seen as they are below the wood , remove the 2 screws from the trigger guard , press in the front barrel band spring clip and pull the front barrel band forward ,remove the spring clip and slide the rear barrel band off the upper hand guard ,remove the top hand guard , you should now be able to remove the breech and barrel and the 2 screws should be visible.
armoury
m1a1 Thompson,sten mk2,mp40,stg44,sterling,mk2 bren gun,lee Enfield no4 mk1,Mauser Kar98, Walther ppk,smith and Weston m10 and Mauser m712
Give me a big enough hammer and a place to stand and I could fix the world.
i'll kill a man in a fair fight or if i think he's going to start a fair fight or over a woman or.......
a problem shared is a problem halved ,but an advantage shared is no advantage at all
if a job's not worth doing then its certainly not worth doing well
Ah! That did the trick. Thank you 
Kitwhore files: S&S Lee Enfield No. 4, AGM Sten Mk. II, Tanaka Kar 98k, WE Luger P08
Wishlist: AGM Stg44, possible LE No. 4 gas project
