that's exactly what i wear but not a lot cheaper than a repro , less itchy though and cooler

this is the one , only a little reading . viewtopic.php?f=13&t=1613

use a flat blade screwdriver , insert it in the hole and rest it on the edge of the disk on the other side and tap the screw driver with a mallet , th...

Modify an AK midcap to fit in a RS mag. thats an easy enough thing to do , just have to hope the magazine receiver is the same shape for a bren mag.

yup same as the mouser stock , i just could not justify £50-70 on one so i had to wait 2 years for one to come up second hand for £20 .good luck wit...

depending on the type of stain you use it can be re stained after oiling , you need a spirit based stain not water based stain , basically if it smell...

hello and welcome the "hells highway " game would be a perfect introduction to ww2 airsoft and the free kit is a bonus and hire guns as well...

Looking Good!! just realised i never mentioned this was your's, glad you like it.

did most of the milling of the breach , cut and fitted the dolt release catch , still need to cut the stripper clip slot. #

once you have the mp40 arms blued then i recommend a clear lacquer as they mark up really easy and its a bit sole destroying after all the work gettin...

what sort of fault has it got ? there's no screws on em so it might be destructive to open them.

it wont fit my normal length luger (it does have a groove for a stock)and i don't think the grip is different on the artillery luger but i may be wron...

i used a cheap Vanrez tight bore on mine and with the hop mod it transforms the gun ,really well worth doing but i cant tell if the tight bore made a ...

rear sight cut off , milled to fit and screw'd on to outer barrel.

got a fair bit more done today, cut down the vsr outer barrel ,cut down the kar98 outer barrel and made the adapter piece to join them ,cut out the fo...

they are the same from the same factory just re branded,only difference i have seen is the colour of the wood but otherwise just go for the better dea...

here we are again, this is going to be my last offering for the time being as Dadio needs a break and to play about with a few thing's i've been putti...

glad you got em working well, have you found a gas that will give 350 fps or are you going to use them as sniper rifles.