hi and welcome people on here are always helpful so ask before you buy or have any questions about what you need , and always remember there are plent...

hello and welcome

hi Josh Mark Dorling and Cat Dolden don't seem to be on the German list yet , sat only , money already sent.

that explains it , cheers

candy time

hop adjuster/bolt stopper tool made and oiling the stock , so it's just glueing the do-dads back on the stock , re assembling and testing and she's al...

my 44 is buried at the moment but a little advice is to replace the gearbox bearings as they are a rather soft copper/cheese material and wear fast.

people will pay over £1000.00 for a systema m4 ptw so there is a market , and if it's a limited run .... just seems that they could shift a lot more ...

does seen a little dear but after making a 42 I can tell why.

made up the easy remove bolt stopper today , it sits in exactly the spot that the sprung pin that located the magazine base plate on the dboys , so i ...

it may be like a tanaka , swing the chamber out and look for a little grub screw above the barrel.

finished the breech today by cutting the stripper clip slot and other shaping of the breech top .also made up the sleeve that fits over the front of t...

looks nice well done

finally got round to the bolt handle , as i've done before i made it so the safety works in so far as it locks the cocking handle , it still can be fi...

pocket can be removed or if you leave the blouse on then you wont see it .

just sent money for Saturday only for Mark Dorling and Cat Dolden for German side.

well i've got a fair bit more done , cut the mag well , cut and screwed on the piece that extends the breech at the back for the rear mounting , drill...