The feed tube,i use what beer barrels are piped up with, in pubs,go to your local and ask have they got a bit kicking about,inside the pipe is 7mm and...

Yeap,as steve.d says the rounds do fall through the bottom and the belt comes out from the right side.

on most i use satin black,then rover gunmetal silver lightly spray on the guns,to give worn look,get the paints from all car parts shops.

Looks very good oddball,might even try blueing my .30cal even might build a mg42 looking at yours,is there anywhere for measurements i can use from. ...

I used a piece of 15mm flat metal,then cut it to shape,then drilled a hole through it so the top sight folds down,give warren a call i think he moulds...

If you are doing out of metal,tools needed welder,grinder,drill,hacksaw,files,then all you need is the measurements and work out what steel you need,a...

me thinks wood be your best option,or less you have a mig welder and make it out off steel sheet.

keep it up mate,looking good

Looking Good D-Company

The tanker never saw service till after the war and there was 2 models solid stock(T26) and a folding butt stock(M1E5),But never seen or heard with sc...

i keep all my AEG's roughly about 310 to 325fps,in that way you can use them at any sites,my .30cal is 365fps and i keep that at 20mtrs.