Just a set of wild ideas... Do the bbs come out of the mag as the loader nozzle pushes and what gas is being used? Is the return sping quite stro...

An other ideas why it's broken 2 chambers? I am now stumped...

I think that the silver barrel cover is moving way too much - certainly more than a few mm. If this is what's causing the problem, can the cover be fi...

I've also noticed that the silver barrel sleeve is moving. This doesn't look right so I think I'm going to fix it with a grub screw. Anyone else notic...

Where will we be kipping on Friday night and is late arrival a problem? Working till at least 16:00 then have to drive from B'ham. Sorry for the dumb...

It was the litte plastic arm on the loader tube thingy. I think it broke off due to a dodgy ag so I installed the spare one that came with the gun and...

Yes please a takedown guide would be most welcome. I going to hange the loadng tube and clean what I can but could with tsome help gettng the bits o...

Definitely a short. I had the same thing with an AGM M14 when trying to fit a MOSFET. Simple crossed wires = lots of smoke, flaming FET and melted bat...

It's a grub screw. If B&Q can't deliver, I'll have to use a very small elec screw

It's the tiny little allen-headed screw that secures the bit circled. Screw goes right in at the top, is tiny and b*gger to find when you drop it...--...

Nope - the CYMA ones are just M1A1's with a 1928 foregrip. Stock and body are all wrong! If you really want a m1928 then buy an AZR kit, a dremel and ...

We need a M1928. I hate the guys who sell theirs for $1000- who the hell will pay $1000 for a used gun? um... theres one coming soon from CYMA... No...

Whilst you're in there I'd also replace the piston (I always use Aluminium ones) and piston head (get one with bearings). Any chance of a link/