Thanks for the pics! Great bit of airsoft engineering! BTW, how is the shell/nozzle connected and sealed against the bolt/cyclinder?

So far your's is the only success story. Congratulations! Would you mind posting pics of the new cylinder+nozzle and the new piston? How did you go...

From our last shoot/game:

Hi! Any updates on how well this improves the shots as compared to the stock unit? Did you install it in a Tanaka or G&G?

There is also the MP44 which is also great OTB.

You can check the mag for leaks by filling it with gas and placing it under water. Bubbles=leaks. Easy fix if the leak is from the bottom of the mag...

I've seen several successful SVT 40 builds using: 1) springer A&K dragunov 2) Springer A&K dragunov with a modified M14 gearbox 3) M14 intern...

It's because gas is the easiest way to do it and still be 99% true to the original in terms of design. True, the spring M700s are a godsend...but the...

Well i just got mine on hand. And here's the good news: Mine already came with a steel hammer and a steel firing pin. I guess G&G really listens...

Thanks! Actually, the AGM L96 isn't like the other L96 clones..it's sort of like a VSR10 clone in an L96 stock. I'm almost 90% sure it uses the same ...

Recently repaired one with the same problem: gear axle broke. Which is a surprise because SRC gears usually have good reviews. Anyway, i replaced th...

Last Sunday was the 70th anniversary of the Battle of Bataan. Our small (and i think the only one in the country) reenactment group staged a short re...

Good news from G&G:

Here's the thing, if your nozzle is moving, then your gears are working. If you hear the gun firing, then your piston is fine. If bbs are falling ou...

You can replace the spring with a stronger AEG spring. Clean the barrel and seal all leaks (hop chamber, hop rubber, barrel). Lube internals well.

I agree. Over shimming is the most common cause of iatrogenic (sorry, doctor speak for "of your own making") gearbox failure. Try reshimmi...

Have the pics been removed?

I suggest you do a series of compression tests before you buy anything...check out this link: Test the compression by occluding the cylinder nozzle...

Some in-game pics of our last WW2 game. Mixed impressions. Pistol games at the end of the day: