Steel tube as outer barrel, going in. Of course it’s coming out again to fit sleeving for inner barrel and the inner itself, just making sure it sits ...

I have found some shells that fit, and they are indeed by Dan Wesson , but can’t work out what model they’re from. Other than that, there seems to...

Procrastination over, when in doubt, ........put the hacksaw to it!-- attachment is not available --

Finally got around to doing something on this, so checked length to cut to sling hanger, it’s going to be a little more difficult than I first thought...

I want to get on this, just trying to wangle the time from work, will let you know ASAP. Andy

The epoxy I’m using is called K2 metal bond, found it on EBay, now I know you’re not an advocate of EBay but it does turn up with the goods sometimes,...

On the project gun, it will be running AK mid caps anyway, the hi cap just happened to be with gun at the time of conversion, I thought it might stru...

Well, after another go, it seemed to be the mag, firing the gun on its side, mag proper way up one double shot in about forty, and obviously when spri...

Here’s a few more pic’s-- attachment is not available ---- attachment is not available --

Spent a bit of time on this today, got it firing after a little trim off of the nozzle, now I didn’t expect too much from this, which is just as well,...

I think these are all in period,-- attachment is not available --

Took this M14 as is, to a game yesterday, mainly to try distance and accuracy, remembering that the hop unit is “ from the box” as it were, the only w...

I’ve not been near a gbb sten, would not be my personal choice to have one anyway, but I know you quite like a gas gun, so it’s probably a case of pay...

I shall be using bolt action rifles, but is there any restriction on pistols. Andy

It’s easy to get carried away and spend money and time on something, I’ve done it a few times on projects and while I enjoy making these things someti...

I will probably make front end from steel, possibly Aluminium, the plan is( which may change!) the main outer barrel to be replaced full length in 16m...

That is one I prepared earlier......now collecting bits to make the top receiver look like a G43.

That’s COLRON Georgian medium oak stain, god I really f#*@£ ing hate predictive text!

Try again, pic didn’t appear,-- attachment is not available --