The stain used is Colton, Georgian medium oak, one coat, a couple extra “end” coats as it draws in quick, left to dry then a coat of beeswax, not forg...

Stage one, done! Might get another mag mod done before the game,-- attachment is not available --

Hi Nick, have you tried looking on surplusandoutdoor.com? Got a good range of Brit ww2 ish kit, fairly cheap too. As for weapons, I believe Warren at ...

Done a bit more to top wood, all fits nice, but will have to be shortened, when I get to do the barrel end as the Garand top wood from receiver to sli...

That’s where I went a bit too low with the dremel bit, trying to find a comfortable catch line. So built it back up with epoxy. Used the dremel to pu...

The pic with the three mags, shows a new one, one has been “adjusted “ to fit, the last one nearly finished, fits in fires, gives around 11 shots, thi...

Yes this one I have is very old, by airsoft standards. Even Warren said it was a very early one when I asked him a couple of years ago. I belleive it...

Thanks, no great hurry

When you have some for sale, I’ll have one, along with mag well, my MP 40 has just developed it’s misfire again. I’ve sorted it twice, but it’s come b...

Yes that was a bit of a fluke, when first fitting the arm thought “ here we go, grief “ but was almost there straight away. Whole thing is nearly do...

A bit more done this evening, close it finish now, a last strip down, for paint and check everything is ok. Must remember to drop fps, as it’s running...

Bolt/cylinder conversion happening this morning, but now I have to go work.-- attachment is not available --

Here’s some pic’s of the old barrel and hop, you can see no adjustment.-- attachment is not available ---- attachment is not available --

Took as much off the mag as I dare, came across a little soft spot and thought”that’ll do pig” so gave it a clean up added a bit of wood “ camo” than ...

Where I work, we cut springs a lot of the time, mainly aiming for around 340fps trying to keep under the 350mark, because of difference in chrono’s on...

I will shape the edges more, although I think I’m near the limit, but first must make the hop totally secure and sure that it can’t move. The mags do ...

I’ve seen stock duplicators up for sale, £1000-1200 or there abouts, but I agree with you, to either buy or make one, is a lot of effort/money probabl...

No support at all, old hop unit was pinned straight to the lower stock, so old, no hop adjustment. Can’t say on anything else, as that’s all there was...