Is this still available? I tried to pm you but not sure whether it sent or not.

How about a Boys anti-tank rifle?

The brass collars on mine were a bit sticky to start with but wore in after a while

Could be the storage charge is a little lower than the cutoff voltage for your charger. You could try getting it fully charged on a cheaper charger li...

Picked up a tan and water jump smock and a few other late war bits.

First remove the bracket at the front then knock out the pin here and remove the trigger. Make sure the two return springs stay in place. You'll th...

Yeah just remove the trigger guard then pull the action out. Undo these two screws in front of the trigger and you should be able to remove the hammer...

I don't think so. It's just two parts inside the body. The new hammer might even be a more optimal shape to strike the release on the co2 mags too.

It could be either the hammer has worn down and needs replacing with the steel one or the striker spring might need switching to the stronger one you ...

Here's the ball bearing and the spring is still set in the hole. It looks to be about 3.5mm, I don't have my calipers handy to be more accurate. A pen...

Those stop the bolt handle from moving up after you've cocked it and put the handle back down ready to fire. Other than making the bolt loose they sho...

Yeah I can vent the green gas mags with a firm push it a thumb on the lever. I know the co2 mags came with an extra spring and some made mention of us...