About 3 minutes, so mix only a little at a time.

... finally uploaded the photos I took at "Sevastopol" viewtopic.php?f=207&t=14580&start=60

A bit late I know, but they were on film, and I was busy.

I agree with Jetta, if you want a really fine finish between filler/putty/rapid steel and other materials, something like car fine body filler or even...

Okay time to say Thanks for all the advice, chaps, I found a bit of brass tube in the garage, cleaned it up, popped it in and just chronoed ...

Okay, the gun still Chronos at around 308 fps (not completely awful really) and while I was doing that a couple of things have just occurred to me: 1...

Okay, I squeezed a larger o-ring in to the piston head but it was too thick so I had to trim down the outside (not easy to do neatly with a craft knif...

More progress After squeezing an o-ring in to the plunger type piston head it shoots at 310 fps +/- 4fps with a 110 spring in it. A bit low,but in ...

Oh, and is there such a thing as a 45 degree APS2 piston? I have seen one referred to on a forum but can't see such a thing for sale.

No, the outer barrel slips into the receiver and is held in place with a screw through the bottom, so it is all exactly as it was made. There is a tin...

Progress today: I was given a stock TM VSR10 spring guide which I ground down to fit in my cylinder, (APS2 guides have a different back end). I was...

... am wearing my tank top

I had a fabulous weekend, I thought the standing orders helped, the unit cohesion was great. The skirmishes felt like real tactics were being used wit...