If you can find a sten gearbox (essentially a Version 7 gearbox with a straight motor cage) i think it would fit. There is an existing Sten to MP28 c...

This looks absolutely amazing! I'd have to admit, i was a bit skeptical when you were starting the build (probably due to my intense dislike of the M...

Over here the average fps is around 450. So to be competitive with a very hearvy, not so mobile MG, i'll have to set it at 470-480 (still within lega...

Thanks! ROF is no where near that of the realsteel at this point. After i work out the feeding issues, I'll be working on increasing the ROF.

It's done! To summarize..... *This was based on greatly modified MG42 plans from john-tom.com *Receiver, barrel shroud and top cover fabricated...

Thanks! When you connect it to the trigger switch this way, does the battery from the gun (which is also connected to the trigger) contribute anythin...

I've paid around USD250 for the metal work so far. I wish i had the skill, space and tools to do this at home on my own. Here it is so far. Bipod a...

I hope this is a clone of the Tanaka and not the Marushin....

Almost done... Made some of the externals using flattened PVC. The top cover latch is spring loaded and works great. The barrel door is only cosme...

Update: I got the charging handle and iron sights from the post office. I ordered these from BRP gun corp st a very good price. The charging handle...

Thanks! Yup, i had to buy the plans, but they are very cheap. They're listed under replica firearms in the site. Though a had to make a lot of modi...

The gas version is exactly the same as the spring version except for the bolt. In the gas version, the gas is loaded into the bolt itself. Shells ar...

Some updates: Changed my mind about the hop up. I've decided to used an unaltered AK hop chamber instead of the 45 degree feeding one that i made. ...

The main problems of the dboys Kar98K (and of the original Marushin) are leaks and upgradability. Even if you change the two piece barrel with tigh...

You could just sand the horizontal grip to fit the 1928. It's easily done.

I've ordered one and it's pretty impressive. My sten is much more comfortable to hold now.

Thanks! The frame was CNC cut from mild steel then welded together by a local metalworks (same guys who did my PPSH). They based it off drawings i m...

More progress: Grip frame came in today. It's made up of layered laser cut mild steel sheets (2x10mm + 2x1mm). The grip is made out of layered 3mm ...

Did some work on the Drum magazine. Based it on pictures from Sgt.Heide's build. It has M4 C-mag internals. Sound activation as well as a custom s...