That’s looking good! Lots of work! I made a mock up of one years ago, to hang on a 1941 bmw combo, I made the whole lot too, but nowhere near the deta...

Ok, mag fitted, does hang a tad low, I can remove a bit more from mag casing, but this is the lowest mag, in height I could find, even lower than a vs...

Slimmed and fitted hop unit, aligned barrel. Just waiting for a bit of jbweld to set, used it as a levelling bed. Think of some way to secure the hop,...

A vsr type trigger box fitted, and below a vsr type hop unit to fit, that will probably need slimming down a bit.....got a few of these so if it doesn...

Yes, the mag being lower, is one of the reasons to make a working prototype, if I can make a straight line one, I can make one slightly longer with ma...

Not an FG 42, a Johnson 1941 LMG, going to attempt two at once, hence the reason for side feed hop unit. Nearly done on conversion to the test bed AK,...

As usual, pics arse about face, the last pic shows the donor gun.

Nice job, nice colour! Did you make the pipe in two pieces, or printed complete tube? Andy

For what started as a dubious day weather wise, turned out to be another great Pacific theatre game, well done to Chris and Co., I managed to get to t...

I did think about just turning it on it’s side and do a “ tdc “ type of hop adjustment, and for the barrel placement, to sleeve over the hop on the cl...

Looks good, all metal?

Explanations are not needed Gavin, I’m already having parts made, from a guy in Braintree. He runs 4 printers, the trouble is he’s very busy with oth...

This is great stuff! Maybe I’ll have to commission you to make some Sten type hop units, as the originals of those are pretty pony, as well. Also want...

I would call it a selector cam, but what it’s called in the USA.......