I'd have made the centre laminations in 2 parts to form the wiring channel.

You might want to try a spokeshave or block plane for the roughing.

I had a fondle of one last week - very nice and makes a great noise!

Do you really need the high muzzle velocity? 20rps/1200rpm would be easily possible with a lighter spring.

Nice. What's the rate of fire?

My wheels with bar grips are here and the lathe hand wheels which do look nice, maybe the gun didn't have space to have both hand wheels at 5" so...

OK. Mine's likely not going to see serge, only a Denison. Any "special precautions" WRT using the SnS liquid stuff?

Check out this idea. It automatically winds when the tension is released by firing, though there may not be enough room in the mag for it:

its an mp40 gearbox to an ak hop with a psg1 barrel , can anyone give some advice please? That could be your problem. The barrel's roughly twice as l...

It's a bit small. Or that's a big P90!

Blancoing guides mention where not to apply blanco, but don't always show it. Could someone provide pictures of the backs of belt ends (where they fo...

If you want colour then any normal colour negative film will be fine, pop them into your local 1hr lab as per above. I'd be inclined to shoot in colou...

Could be worse - http://cgi.ebay.co.uk/Mens-American-GI-US-Army-Soldier-Fancy-Dress-Costume-/170573295660?pt=Adult_Fancy_Dress_UK&...

From a Babel Fish "translation", I get the impression it's coming soon. Unfortunately what I think is the date says "Receiving a littl...