soak the webbing and it will stretch over, i usually wedge some packing in as well under the webbing so that once it dry's it's a looser fit and slide...

awesome find ,i wonder if there's scope for an eye safety copy of some sort? i must admit i fancy a bit of the desert campaign in the game's ,must be ...

i cut the casting down and i think it really is usable now , i have to stress that for most people this will not need to be done, i'm not using the ca...

beautiful work well done , you are lucky in being able to use so much of the real gun , over here there are loads of parts that are restricted so i...

right ,now i have the stock mounted i can go a little further with the casting for the breech and i have a question to ask Chris ,i have laid the cast...

good find ,i had been watching them on airsoft pander but lost the trail when they went belly up. oh yes the dboys are only fit for ripping apart and ...

a little more done today, started on the stock mount. used my usual method of taking steel tube section ,cut ,welded, re formed ,welded to the trigger...

is it the release valve in the mag? if so does the mag give consistent power in both gun's ? or is it in the gun

-/+ 10 fps is ok at 430fps, any scope for lowering it to 350fps?

hi and welcome best to look at the games and see what takes you'r fancy, then look to borrowing the kit for the first event , as mentioned gunman even...

so many target's you can't miss

top woodwork fitted over hop ,had a job getting the barrel band fitted ,quite a bit had to be chiseled out but its a nice fit now. next i need to ...

8v15 should be ok so long as there are plenty of mass charges under the red flag screaming "for mother Russia "

They all shake a bit. Mine has shaken for almost 7 years, without a single misfeed and never skipping a beat. Just get out and use the bloody thing!...

right ,most of the wobble is from the linking piece that goes between the two parts of the gun, its like a rod with a hole in it and it wobbles (exces...

i cant think of a practical and reliable way to move the mag for the bb's back to the position of the real one, plus they were never loaded that way i...

put the breech detail on a back burner while i think, so another thing i wanted to try was to make removing the bolt easier, the bolt stopper is usual...