So it would be safe to say that you can buy one of these normal ones instead of the G Model and make the adjustments or would i be better spending the...

Havent had to do what the video suggest, but i found gutting the spring mech and replacing with a TM or something decent, and removing the food(yes, i...

Gave it a quick run at POW this afternoon, only fired 2 mags through it in anger and accounted for 7, possibly 8 enemy at range. Which isnt a bad rati...

It's a fair point that different gasses can be used to suit the site limits/conditions. The problem with that is I use propane/green in everything els...

You're welcome. If anyones interested I can do a how-to on fitting a PAX/2roy/King Arms M700 VSR hop rubber/barrel conversion to the 98k too. Haven't...

do tell us more Ok; Remove your bolt. Pop the faux extractor off and dump it to one side. You will find 2 screws on the bottom of the bolt that wi...

An old thread I know, apologies for this. Not sure if people are aware but it is VERY easy to downgrade these badboys with nothing more than a 1.5mm ...

Put me down for 2 and a couple of extra rubbers if it makes it any more economical and cuts the waiting down

The pax is night and day better than the BGS, I'd agree. The major advantage the Pax has over the bgs and stock unit IMO, is that it applies pressure ...

Do these still exist?

Please. I had a BGS for my M700, while it was an improvement, it wasnt great like my VSR. but I found there are modifications that can be made to inc...

Are the belt hooks necessary for use with Y straps?

Bit late to the party here....any of these still available?