who's making the gliders?

berlin or starlingrad anybody,for that matter any city any period of ww2,potential for allied or axis victory based games or even german capture on fi...

took the measurements from the bayonet fitting on my trenching tool then added a little cos its easy to remove metal.no bayonet lugs on barrel as yet ...

37 pattern bd blouse from costafortune, lovelly fit really pleased. 3 thompson gearboxes ,3 ak hop kits ,3 systema barrel seal rubbers,all due to beco...

that should be fine ,just check the measurements.the other thing to take into account is that the higher amperhoure output can be detrimental to the t...

just need to finalise mag catch ,front outer barrel and rear sight fitting. to that end i need a little info,how long does the barrel protrude at the...

kalashnikov kid start a thread imediatly ,its what we all live for,and you'r mp40 refurb job was exellent with lots of "how to" in it witch...

bolt atached mag hole cut and one mag modded,the mag still sicks out a little bet profileing should reduce the protrusion.

a good spot for airsoft lipo's is the component shop they are good and reasonably priced,firefox tell lies about the c rating of their batterys be wa...

wont be makeing any more for the foreseable future as when its done i've got to make a batch of sterlings(pratchets),or a flock of sterlings if you li...

mag cut and welded to the trigger guard and stock mounting piece structurally complete just needs sculpting with epoxy putty.i welded a nut into a pie...

this isnt going to be as detailed as the bren at least initially as its a bit of a rush job but the bodged bits are being done with a vew to re workin...

if its the intelegent type charger (most lipo chargers are)with the three lights on, then you charge till all the lights go out.three lights for 11.1v...

well thats it so far,going to cut down the mag and weld it to the trigger guard ,ive shown it in the position in the trigger guard,it looks visually w...

cheers ,thats exactly why this forum is so flaming good,cos thats exactly what i needed to know.

there is only one hole and that one lines up with the guard that goes outside it to clamp it on ,there is a drilling lower down that looks like what y...

my local site is ambush chobam surrey and it really it that number and its woodland with two villagy bits

hi ,you'r choice, brit ,german,rusky or yank ,all welcome.